.\" $Xorg: Xserver.man,v 1.4 2001/02/09 02:04:07 xorgcvs Exp $
.\" $XdotOrg: xserver/xorg/doc/Xserver.man.pre,v 1.4 2005/12/23 20:11:12 alanc Exp $
.\" Copyright 1984 - 1991, 1993, 1994, 1998  The Open Group
.\"
.\" Permission to use, copy, modify, distribute, and sell this software and its
.\" documentation for any purpose is hereby granted without fee, provided that
.\" the above copyright notice appear in all copies and that both that
.\" copyright notice and this permission notice appear in supporting
.\" documentation.
.\"
.\" The above copyright notice and this permission notice shall be included
.\" in all copies or substantial portions of the Software.
.\"
.\" THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
.\" OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
.\" MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
.\" IN NO EVENT SHALL THE OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR
.\" OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
.\" ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
.\" OTHER DEALINGS IN THE SOFTWARE.
.\"
.\" Except as contained in this notice, the name of The Open Group shall
.\" not be used in advertising or otherwise to promote the sale, use or
.\" other dealings in this Software without prior written authorization
.\" from The Open Group.
.\" $XFree86: xc/programs/Xserver/Xserver.man,v 3.31 2004/01/10 22:27:46 dawes Exp $
.\" shorthand for double quote that works everywhere.
.ds q \N'34'
.TH XSERVER 1 __xorgversion__
.SH NAME
Xserver \- X Window System display server
.SH SYNOPSIS
.B X
[option ...]
.SH DESCRIPTION
.I X
is the generic name for the X Window System display server.  It is
frequently a link or a copy of the appropriate server binary for
driving the most frequently used server on a given machine.
.SH "STARTING THE SERVER"
The X server is usually started from the X Display Manager program 
\fIxdm\fP(1) or a similar display manager program.
This utility is run from the system boot files and takes care of keeping
the server running, prompting for usernames and passwords, and starting up
the user sessions.
.PP
Installations that run more than one window system may need to use the
\fIxinit\fP(1) utility instead of a display manager.  However, \fIxinit\fP is
to be considered a tool for building startup scripts and is not
intended for use by end users.  Site administrators are \fBstrongly\fP
urged to use a display manager, or build other interfaces for novice users.
.PP
The X server may also be started directly by the user, though this
method is usually reserved for testing and is not recommended for
normal operation.  On some platforms, the user must have special
permission to start the X server, often because access to certain
devices (e.g. \fI/dev/mouse\fP) is restricted.
.PP
When the X server starts up, it typically takes over the display.  If
you are running on a workstation whose console is the display, you may
not be able to log into the console while the server is running.
.SH OPTIONS
Many X servers have device-specific command line options.  See the manual
pages for the individual servers for more details; a list of
server-specific manual pages is provided in the SEE ALSO section below.
.PP
All of the X servers accept the command line options described below.
Some X servers may have alternative ways of providing the parameters
described here, but the values provided via the command line options
should override values specified via other mechanisms.
.TP 8
.B :\fIdisplaynumber\fP
The X server runs as the given \fIdisplaynumber\fP, which by default is 0.
If multiple X servers are to run simultaneously on a host, each must have
a unique display number.  See the DISPLAY
NAMES section of the \fIX\fP(__miscmansuffix__) manual page to learn how to
specify which display number clients should try to use.
.TP 8
.B \-a \fInumber\fP
sets pointer acceleration (i.e. the ratio of how much is reported to how much
the user actually moved the pointer).
.TP 8
.B \-ac
disables host-based access control mechanisms.  Enables access by any host,
and permits any host to modify the access control list.
Use with extreme caution.
This option exists primarily for running test suites remotely.
.TP 8
.B \-audit \fIlevel\fP
sets the audit trail level.  The default level is 1, meaning only connection
rejections are reported.  Level 2 additionally reports all successful
connections and disconnects.  Level 4 enables messages from the
SECURITY extension, if present, including generation and revocation of
authorizations and violations of the security policy.
Level 0 turns off the audit trail.
Audit lines are sent as standard error output.
.TP 8
.B \-auth \fIauthorization-file\fP
specifies a file which contains a collection of authorization records used
to authenticate access.  See also the \fIxdm\fP(1) and 
\fIXsecurity\fP(__miscmansuffix__) manual pages.
.TP 8
.B \-bs
disables backing store support on all screens.
.TP 8
.B \-br
sets the default root window to solid black instead of the standard root weave
pattern.
.TP 8
.B \-c
turns off key-click.
.TP 8
.B c \fIvolume\fP
sets key-click volume (allowable range: 0-100).
.TP 8
.B \-cc \fIclass\fP
sets the visual class for the root window of color screens.
The class numbers are as specified in the X protocol.
Not obeyed by all servers.
.TP 8
.B \-co \fIfilename\fP
sets name of RGB color database.  The default is
.IR __projectroot__/share/X11/rgb .
.ig
.TP 8
.B \-config \fIfilename\fP
reads more options from the given file.  Options in the file may be separated
by newlines if desired.  If a '#' character appears on a line, all characters
between it and the next newline are ignored, providing a simple commenting
facility.  The \fB\-config\fP option itself may appear in the file.
.BR NOTE :
This option is disabled when the Xserver is run with an effective uid
different from the user's real uid.
..
.TP 8
.B \-core
causes the server to generate a core dump on fatal errors.
.TP 8
.B \-deferglyphs \fIwhichfonts\fP
specifies the types of fonts for which the server should attempt to use
deferred glyph loading.  \fIwhichfonts\fP can be all (all fonts),
none (no fonts), or 16 (16 bit fonts only).
.TP 8
.B \-dpi \fIresolution\fP
sets the resolution for all screens, in dots per inch.
To be used when the server cannot determine the screen size(s) from the
hardware.
.TP 8
.B dpms
enables DPMS (display power management services), where supported.  The
default state is platform and configuration specific.
.TP 8
.B \-dpms
disables DPMS (display power management services).  The default state
is platform and configuration specific.
.TP 8
.BI \-extension extensionName
disables named extension.   If an unknown extension name is specified,
a list of accepted extension names is printed.
.TP 8
.BI \+extension extensionName
enables named extension.   If an unknown extension name is specified,
a list of accepted extension names is printed.
.TP 8
.B \-f \fIvolume\fP
sets feep (bell) volume (allowable range: 0-100).
.TP 8
.B \-fc \fIcursorFont\fP
sets default cursor font.
.TP 8
.B \-fn \fIfont\fP
sets the default font.
.TP 8
.B \-fp \fIfontPath\fP
sets the search path for fonts.  This path is a comma separated list
of directories which the X server searches for font databases.
See the FONTS section of this manual page for more information and the default
list.
.TP 8
.B \-help
prints a usage message.
.TP 8
.B \-I
causes all remaining command line arguments to be ignored.
.TP 8
.B \-maxbigreqsize \fIsize\fP
sets the maximum big request to
.I size
MB.
.TP 8
.B \-nolisten \fItrans-type\fP
disables a transport type.  For example, TCP/IP connections can be disabled
with
.BR "\-nolisten tcp" .
This option may be issued multiple times to disable listening to different
transport types.
.TP 8
.B \-noreset
prevents a server reset when the last client connection is closed.  This
overrides a previous
.B \-terminate
command line option.
.TP 8
.B \-p \fIminutes\fP
sets screen-saver pattern cycle time in minutes.
.TP 8
.B \-pn
permits the server to continue running if it fails to establish all of
its well-known sockets (connection points for clients), but
establishes at least one.  This option is set by default.
.TP 8
.B \-nopn
causes the server to exit if it fails to establish all of its well-known
sockets (connection points for clients).
.TP 8
.B \-r
turns off auto-repeat.
.TP 8
.B r
turns on auto-repeat.
.TP 8
.B \-s \fIminutes\fP
sets screen-saver timeout time in minutes.
.TP 8
.B \-su
disables save under support on all screens.
.TP 8
.B \-t \fInumber\fP
sets pointer acceleration threshold in pixels (i.e. after how many pixels
pointer acceleration should take effect).
.TP 8
.B \-terminate
causes the server to terminate at server reset, instead of continuing to run.
This overrides a previous
.B \-noreset
command line option.
.TP 8
.B \-to \fIseconds\fP
sets default connection timeout in seconds.
.TP 8
.B \-tst
disables all testing extensions (e.g., XTEST, XTrap, XTestExtension1, RECORD).
.TP 8
.B tty\fIxx\fP
ignored, for servers started the ancient way (from init).
.TP 8
.B v
sets video-off screen-saver preference.
.TP 8
.B \-v
sets video-on screen-saver preference.
.TP 8
.B \-wm
forces the default backing-store of all windows to be WhenMapped.  This
is a backdoor way of getting backing-store to apply to all windows.
Although all mapped windows will have backing store, the backing store
attribute value reported by the server for a window will be the last
value established by a client.  If it has never been set by a client,
the server will report the default value, NotUseful.  This behavior is
required by the X protocol, which allows the server to exceed the
client's backing store expectations but does not provide a way to tell
the client that it is doing so.
.TP 8
.B \-wr
sets the default root window to solid white instead of the standard root weave
pattern.
.TP 8
.B \-x \fIextension\fP
loads the specified extension at init.
This is a no-op for most implementations.
.TP 8
.B [+-]xinerama
enables(+) or disables(-) the XINERAMA extension.  The default state is
platform and configuration specific.
.SH SERVER DEPENDENT OPTIONS
Some X servers accept the following options:
.TP 8
.B \-ld \fIkilobytes\fP
sets the data space limit of the server to the specified number of kilobytes.
A value of zero makes the data size as large as possible.  The default value
of \-1 leaves the data space limit unchanged.
.TP 8
.B \-lf \fIfiles\fP
sets the number-of-open-files limit of the server to the specified number.
A value of zero makes the limit as large as possible.  The default value
of \-1 leaves the limit unchanged.
.TP 8
.B \-ls \fIkilobytes\fP
sets the stack space limit of the server to the specified number of kilobytes.
A value of zero makes the stack size as large as possible.  The default value
of \-1 leaves the stack space limit unchanged.
.TP 8
.B \-logo
turns on the X Window System logo display in the screen-saver.
There is currently no way to change this from a client.
.TP 8
.B nologo
turns off the X Window System logo display in the screen-saver.
There is currently no way to change this from a client.
.TP 8
.B \-render 
.BR default | mono | gray | color
sets the color allocation policy that will be used by the render extension.
.RS 8
.TP 8
.I default
selects the default policy defined for the display depth of the X
server. 
.TP 8
.I mono
don't use any color cell. 
.TP 8
.I gray 
use a gray map of 13 color cells for the X render extension.
.TP 8
.I color
use a color cube of at most 4*4*4 colors (that is 64 color cells).
.RE
.TP 8
.B \-dumbSched
disables smart scheduling on platforms that support the smart scheduler.
.TP
.B \-schedInterval \fIinterval\fP
sets the smart scheduler's scheduling interval to
.I interval
milliseconds.
.SH XDMCP OPTIONS
X servers that support XDMCP have the following options.
See the \fIX Display Manager Control Protocol\fP specification for more
information.
.TP 8
.B \-query \fIhostname\fP
enables XDMCP and sends Query packets to the specified
.IR hostname .
.TP 8
.B \-broadcast
enable XDMCP and broadcasts BroadcastQuery packets to the network.  The
first responding display manager will be chosen for the session.
.TP 8
.B \-multicast [\fIaddress\fP [\fIhop count\fP]]
Enable XDMCP and multicast BroadcastQuery packets to the  network.   
The first responding display manager is chosen for the session.  If an 
address is specified, the multicast is sent to that address.  If no 
address is specified, the multicast is sent to the default XDMCP IPv6 
multicast group.  If a hop count is specified, it is used as the maximum 
hop count for the multicast.  If no hop count is specified, the multicast 
is set to a maximum of 1 hop, to prevent the multicast from being routed 
beyond the local network.
.TP 8
.B \-indirect \fIhostname\fP
enables XDMCP and send IndirectQuery packets to the specified
.IR hostname .
.TP 8
.B \-port \fIport-number\fP
uses the specified \fIport-number\fP for XDMCP packets, instead of the
default.  This option must be specified before any \-query, \-broadcast,
\-multicast, or \-indirect options.
.TP 8
.B \-from \fIlocal-address\fP
specifies the local address to connect from (useful if the connecting host
has multiple network interfaces).  The \fIlocal-address\fP may be expressed
in any form acceptable to the host platform's \fIgethostbyname\fP(3)
implementation.
.TP 8
.B \-once
causes the server to terminate (rather than reset) when the XDMCP session
ends.
.TP 8
.B \-class \fIdisplay-class\fP
XDMCP has an additional display qualifier used in resource lookup for
display-specific options.  This option sets that value, by default it
is "MIT-Unspecified" (not a very useful value).
.TP 8
.B \-cookie \fIxdm-auth-bits\fP
When testing XDM-AUTHENTICATION-1, a private key is shared between the
server and the manager.  This option sets the value of that private
data (not that it is very private, being on the command line!).
.TP 8
.B \-displayID \fIdisplay-id\fP
Yet another XDMCP specific value, this one allows the display manager to
identify each display so that it can locate the shared key.
.SH XKEYBOARD OPTIONS
X servers that support the XKEYBOARD (a.k.a. \*qXKB\*q) extension accept the
following options.  All layout files specified on the command line must be 
located in the XKB base directory or a subdirectory, and specified as the
relative path from the XKB base directory.  The default XKB base directory is
.IR __projectroot__/lib/X11/xkb .
.TP 8
.B [+-]kb
enables(+) or disables(-) the XKEYBOARD extension.
.TP 8
.BR [+-]accessx " [ \fItimeout\fP [ \fItimeout_mask\fP [ \fIfeedback\fP [ \fIoptions_mask\fP ] ] ] ]"
enables(+) or disables(-) AccessX key sequences.
.TP 8
.B \-xkbdir \fIdirectory\fP
base directory for keyboard layout files.  This option is not available
for setuid X servers (i.e., when the X server's real and effective uids
are different).
.TP 8
.B \-ardelay \fImilliseconds\fP
sets the autorepeat delay (length of time in milliseconds that a key must
be depressed before autorepeat starts).
.TP 8
.B \-arinterval \fImilliseconds\fP
sets the autorepeat interval (length of time in milliseconds that should
elapse between autorepeat-generated keystrokes).
.TP 8
.B \-xkbmap \fIfilename\fP
loads keyboard description in \fIfilename\fP on server startup.
.SH SECURITY EXTENSION OPTIONS
X servers that support the SECURITY extension accept the following option:
.TP 8
.B \-sp \fIfilename\fP
causes the server to attempt to read and interpret filename as a security
policy file with the format described below.  The file is read at server
startup and reread at each server reset.
The syntax of the security policy file is described in 
\fISecurityPolicy\fP(__filemansuffix__).
.SH "NETWORK CONNECTIONS"
The X server supports client connections via a platform-dependent subset of
the following transport types: TCP\/IP, Unix Domain sockets, DECnet,
and several varieties of SVR4 local connections.  See the DISPLAY
NAMES section of the \fIX\fP(__miscmansuffix__) manual page to learn how to
specify which transport type clients should try to use.
.SH GRANTING ACCESS
The X server implements a platform-dependent subset of the following
authorization protocols: MIT-MAGIC-COOKIE-1, XDM-AUTHORIZATION-1,
XDM-AUTHORIZATION-2, SUN-DES-1, and MIT-KERBEROS-5.  See the 
\fIXsecurity\fP(__miscmansuffix__) manual page for information on the 
operation of these protocols.
.PP
Authorization data required by the above protocols is passed to the
server in a private file named with the \fB\-auth\fP command line
option.  Each time the server is about to accept the first connection
after a reset (or when the server is starting), it reads this file.
If this file contains any authorization records, the local host is not
automatically allowed access to the server, and only clients which
send one of the authorization records contained in the file in the
connection setup information will be allowed access.  See the
\fIXau\fP manual page for a description of the binary format of this
file.  See \fIxauth\fP(1) for maintenance of this file, and distribution
of its contents to remote hosts.
.PP
The X server also uses a host-based access control list for deciding
whether or not to accept connections from clients on a particular machine.
If no other authorization mechanism is being used,
this list initially consists of the host on which the server is running as
well as any machines listed in the file \fI/etc/X\fBn\fI.hosts\fR, where
\fBn\fP is the display number of the server.  Each line of the file should
contain either an Internet hostname (e.g. expo.lcs.mit.edu) or a DECnet
hostname in double colon format (e.g. hydra::) or a complete name in the format
\fIfamily\fP:\fIname\fP as described in the \fIxhost\fP(1) manual page.
There should be no leading or trailing spaces on any lines.  For example:
.sp
.in +8
.nf
joesworkstation
corporate.company.com
star::
inet:bigcpu
local:
.fi
.in -8
.PP
Users can add or remove hosts from this list and enable or disable access
control using the \fIxhost\fP command from the same machine as the server.
.PP
If the X FireWall Proxy (\fIxfwp\fP) is being used without a sitepolicy,
host-based authorization must be turned on for clients to be able to
connect to the X server via the \fIxfwp\fP.  If \fIxfwp\fP is run without
a configuration file and thus no sitepolicy is defined, if \fIxfwp\fP
is using an X server where xhost + has been run to turn off host-based
authorization checks, when a client tries to connect to this X server
via \fIxfwp\fP, the X server will deny the connection.  See \fIxfwp\fP(1)
for more information about this proxy.
.PP
The X protocol intrinsically does not have any notion of window operation
permissions or place any restrictions on what a client can do; if a program can
connect to a display, it has full run of the screen.
X servers that support the SECURITY extension fare better because clients
can be designated untrusted via the authorization they use to connect; see
the \fIxauth\fP(1) manual page for details.  Restrictions are imposed
on untrusted clients that curtail the mischief they can do.  See the SECURITY
extension specification for a complete list of these restrictions.
.PP
Sites that have better
authentication and authorization systems might wish to make
use of the hooks in the libraries and the server to provide additional
security models.
.SH SIGNALS
The X server attaches special meaning to the following signals:
.TP 8
.I SIGHUP
This signal causes the server to close all existing connections, free all
resources, and restore all defaults.  It is sent by the display manager
whenever the main user's main application (usually an \fIxterm\fP or window
manager) exits to force the server to clean up and prepare for the next
user.
.TP 8
.I SIGTERM
This signal causes the server to exit cleanly.
.TP 8
.I SIGUSR1
This signal is used quite differently from either of the above.  When the
server starts, it checks to see if it has inherited SIGUSR1 as SIG_IGN
instead of the usual SIG_DFL.  In this case, the server sends a SIGUSR1 to
its parent process after it has set up the various connection schemes.
\fIXdm\fP uses this feature to recognize when connecting to the server
is possible.
.SH FONTS
The X server
can obtain fonts from directories and/or from font servers.
The list of directories and font servers
the X server uses when trying to open a font is controlled
by the \fIfont path\fP.  
.LP
The default font path is
__default_font_path__ .
.LP
The font path can be set with the \fB\-fp\fP option or by \fIxset\fP(1)
after the server has started.
.SH FILES
.TP 30
.I /etc/X\fBn\fP.hosts
Initial access control list for display number \fBn\fP
.TP 30
.IR __projectroot__/lib/X11/fonts/misc , __projectroot__/lib/X11/fonts/75dpi , __projectroot__/lib/X11/fonts/100dpi
Bitmap font directories
.TP 30
.IR __projectroot__/lib/X11/fonts/TTF , __projectroot__/lib/X11/fonts/Type1
Outline font directories
.TP 30
.I __projectroot__/share/X11/rgb.txt
Color database
.TP 30
.I /tmp/.X11-unix/X\fBn\fP
Unix domain socket for display number \fBn\fP
.TP 30
.IR /tmp/rcX\fBn\fP
Kerberos 5 replay cache for display number \fBn\fP
.TP 30
.I /usr/adm/X\fBn\fPmsgs
Error log file for display number \fBn\fP if run from \fIinit\fP(__adminmansuffix__)
.TP 30
.I __projectroot__/lib/X11/xdm/xdm-errors
Default error log file if the server is run from \fIxdm\fP(1)
.TP 30
.I __projectroot__/lib/xserver/SecurityPolicy
Default X server security policy
.SH "SEE ALSO"
General information: \fIX\fP(__miscmansuffix__)
.PP
Protocols:
.I "X Window System Protocol,"
.I "The X Font Service Protocol,"
.I "X Display Manager Control Protocol"
.PP
Fonts: \fIbdftopcf\fP(1), \fImkfontdir\fP(1), \fImkfontscale\fP(1),
\fIxfs\fP(1), \fIxlsfonts\fP(1), \fIxfontsel\fP(1), \fIxfd\fP(1),
.I "X Logical Font Description Conventions"
.PP
Security: \fIXsecurity\fP(__miscmansuffix__), \fIxauth\fP(1), \fIXau\fP(1), 
\fIxdm\fP(1), \fIxhost\fP(1), \fIxfwp\fP(1),
\fISecurityPolicy\fP(__filemansuffix__),
.I "Security Extension Specification"
.PP
Starting the server: \fIxdm\fP(1), \fIxinit\fP(1)
.PP
Controlling the server once started: \fIxset\fP(1), \fIxsetroot\fP(1),
\fIxhost\fP(1)
.PP
Server-specific man pages:
\fIXorg\fP(1), \fIXdmx\fP(1), \fIXnest\fP(1),
\fIXvfb\fP(1), \fIXDarwin\fP(1), \fIXWin\fP(1).
.PP
Server internal documentation:
.I "Definition of the Porting Layer for the X v11 Sample Server"
.SH AUTHORS
The sample server was originally written by Susan Angebranndt, Raymond
Drewry, Philip Karlton, and Todd Newman, from Digital Equipment
Corporation, with support from a large cast.  It has since been
extensively rewritten by Keith Packard and Bob Scheifler, from MIT.
Dave Wiggins took over post-R5 and made substantial improvements.