#
# Makefile for Borland C++ 5.5 (or C++ Builder 5), adapted from the makefile
# for Visual C++ that came with tcl 8.3.3
#
# See the file "license.terms" for information on usage and redistribution
# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
#
# Copyright (c) 1995-1996 Sun Microsystems, Inc.
# Copyright (c) 1998-1999 by Scriptics Corporation.
# TIP #59 information.
#
# This makefile does not set the following configuration cpp
# defines. Behind the defines are the makefile variables listed to set
# to -D... when that feature is enabled.
#
# - TCL_CFG_PROFILED PROFDEFINES
# - TCL_CFG_OPTIMIZED OPTDEFINES
# - TCL_CFG_DO64BIT SIXFOURDEFINES
# Have a look at the complete description on how to build and test Tcl with
# the current Borland compilers at www.ratiosoft.com/tcl/borland.
#
# Usage:
# - Adapt the paths below to match your compiler's location
# - Make sure the compiler's bin directory is on your path
# - Open a console
# - To make a debug version enter
# make -fmakefile.bc -DNODEBUG=0 xxx
# where 'xxx' is the target you want (e.g. 'all', 'test', ...)
# Please note: I omitted the 'd' suffix for debug versions because Tcl
# will always call tclpip83.dll and not tclpip83d.dll, causing an error.
# ^
# Besides, the debug version goes into a separate directory, so there
# should be no problem having DLLs and EXEs with the same name.
# If you prefer your debug version having the 'd' suffix just uncomment
# the line
# #DBGX = d
#
# - To make a 'normal' version enter
# make -fmakefile.bc xxx
# where 'xxx' is the target you want (e.g. 'all', 'test', ...)
#
# DISCLAIMER:
# This makefile has an experimental status - that is those targets which
# have been modified do in fact compile and link with Borland's C++
# Builder 5 and with the free Borland compiler (Borland C++ 5.5).
# However the author assumes no responsiblity for any effect which the use of
# this makefile or of the resulting programs might have on your system.
#
# Not yet modified:
# - The 'plug-in-DLL' and the associated shell.
# - The programs to create the windows help files.
#
# Suggestions and / or improvements are always welcome.
#
# May 2001, H. Giese (hgiese@ratiosoft.com)
#
# Does not depend on the presence of any environment variables in
# order to compile tcl; all needed information is derived from
# location of the compiler directories.
#
# Project directories
#
# ROOT = top of source tree
#
# TOOLS32 = location of Borland development tools.
#
# INSTALLDIR = where the install-targets should copy the binaries and
# support files
#
ROOT = ..
INSTALLDIR = c:\program files\tcl
# If you have C++ Builder 5 or the free Borland C++ 5.5 compiler
# adapt the following paths as appropriate for your system
TOOLS32 = c:\dev\bcc55
TOOLS32_rc = c:\dev\bcc55
#TOOLS32 = c:\bc55
#TOOLS32_rc = c:\bc55
cc32 = "$(TOOLS32)\bin\bcc32.exe"
link32 = "$(TOOLS32)\bin\ilink32.exe"
lib32 = "$(TOOLS32)\bin\tlib.exe"
rc32 = "$(TOOLS32_rc)\bin\brcc32.exe"
include32 = -I"$(TOOLS32)\include"
libpath32 = -L"$(TOOLS32)\lib"
# Uncomment the following line to compile with thread support
#THREADDEFINES = -DTCL_THREADS=1
# Allow definition of NDEBUG via command line
# Set NODEBUG to 0 to compile with symbols
!if !defined(NODEBUG)
NODEBUG = 1
!endif
# CFG_ENCODING=encoding
# name of encoding for configuration information. Defaults
# to cp1252
!if !defined(CFG_ENCODING)
CFG_ENCODING = \"cp1252\"
!endif
# The following defines can be used to control the amount of debugging
# code that is added to the compilation.
#
# -DTCL_MEM_DEBUG Enables the debugging memory allocator.
# -DTCL_COMPILE_DEBUG Enables byte compilation logging.
# -DTCL_COMPILE_STATS Enables byte compilation statistics gathering.
# -DUSE_TCLALLOC=0 Disables the Tcl memory allocator in favor
# of the native malloc implementation. This is
# needed when using Purify.
#
#DEBUGDEFINES = -DTCL_MEM_DEBUG -DTCL_COMPILE_DEBUG -DTCL_COMPILE_STATS
#DEBUGDEFINES = -DUSE_TCLALLOC=0
######################################################################
# Do not modify below this line
######################################################################
NAMEPREFIX = tcl
STUBPREFIX = $(NAMEPREFIX)stub
DOTVERSION = 8.5
VERSION = 85
DDEVERSION = 13
DDEDOTVERSION = 1.3
REGVERSION = 12
REGDOTVERSION = 1.2
BINROOT = ..
!IF "$(NODEBUG)" == "1"
TMPDIRNAME = Release
DBGX =
SYMDEFINES =
!ELSE
TMPDIRNAME = Debug
#DBGX = d
DBGX =
SYMDEFINES = -DTCL_CFG_DEBUG
!ENDIF
TMPDIR = $(BINROOT)\$(TMPDIRNAME)
OUTDIRNAME = $(TMPDIRNAME)
OUTDIR = $(TMPDIR)
TCLLIB = $(OUTDIR)\$(NAMEPREFIX)$(VERSION)$(DBGX).lib
TCLDLLNAME = $(NAMEPREFIX)$(VERSION)$(DBGX).dll
TCLDLL = $(OUTDIR)\$(TCLDLLNAME)
TCLSTUBLIBNAME = $(STUBPREFIX)$(VERSION)$(DBGX).lib
TCLSTUBLIB = $(OUTDIR)\$(TCLSTUBLIBNAME)
TCLPLUGINLIB = $(OUTDIR)\$(NAMEPREFIX)$(VERSION)p$(DBGX).lib
TCLPLUGINDLLNAME = $(NAMEPREFIX)$(VERSION)p$(DBGX).dll
TCLPLUGINDLL = $(OUTDIR)\$(TCLPLUGINDLLNAME)
TCLSH = $(OUTDIR)\$(NAMEPREFIX)sh$(VERSION)$(DBGX).exe
TCLSHP = $(OUTDIR)\$(NAMEPREFIX)shp$(VERSION)$(DBGX).exe
TCLPIPEDLLNAME = $(NAMEPREFIX)pip$(VERSION)$(DBGX).dll
TCLPIPEDLL = $(OUTDIR)\$(TCLPIPEDLLNAME)
TCLREGDLLNAME = $(NAMEPREFIX)reg$(REGVERSION)$(DBGX).dll
TCLREGDLL = $(OUTDIR)\$(TCLREGDLLNAME)
TCLDDEDLLNAME = $(NAMEPREFIX)dde$(DDEVERSION)$(DBGX).dll
TCLDDEDLL = $(OUTDIR)\$(TCLDDEDLLNAME)
TCLTEST = $(OUTDIR)\$(NAMEPREFIX)test.exe
CAT32 = $(TMPDIR)\cat32.exe
RMDIR = .\rmd.bat
MKDIR = .\mkd.bat
RM = del
LIB_INSTALL_DIR = $(INSTALLDIR)\lib
BIN_INSTALL_DIR = $(INSTALLDIR)\bin
SCRIPT_INSTALL_DIR = $(INSTALLDIR)\lib\tcl$(DOTVERSION)
INCLUDE_INSTALL_DIR = $(INSTALLDIR)\include
TCLSHOBJS = \
$(TMPDIR)\tclAppInit.obj
TCLTESTOBJS = \
$(TMPDIR)\tclTest.obj \
$(TMPDIR)\tclTestObj.obj \
$(TMPDIR)\tclTestProcBodyObj.obj \
$(TMPDIR)\tclThreadTest.obj \
$(TMPDIR)\tclWinTest.obj \
$(TMPDIR)\testMain.obj
TCLOBJS = \
$(TMPDIR)\regcomp.obj \
$(TMPDIR)\regexec.obj \
$(TMPDIR)\regfree.obj \
$(TMPDIR)\regerror.obj \
$(TMPDIR)\tclAlloc.obj \
$(TMPDIR)\tclAsync.obj \
$(TMPDIR)\tclBasic.obj \
$(TMPDIR)\tclBinary.obj \
$(TMPDIR)\tclCkalloc.obj \
$(TMPDIR)\tclClock.obj \
$(TMPDIR)\tclCmdAH.obj \
$(TMPDIR)\tclCmdIL.obj \
$(TMPDIR)\tclCmdMZ.obj \
$(TMPDIR)\tclCompCmds.obj \
$(TMPDIR)\tclCompExpr.obj \
$(TMPDIR)\tclCompile.obj \
$(TMPDIR)\tclConfig.obj \
$(TMPDIR)\tclDate.obj \
$(TMPDIR)\tclDictObj.obj \
$(TMPDIR)\tclEncoding.obj \
$(TMPDIR)\tclEnv.obj \
$(TMPDIR)\tclEvent.obj \
$(TMPDIR)\tclExecute.obj \
$(TMPDIR)\tclFCmd.obj \
$(TMPDIR)\tclFileName.obj \
$(TMPDIR)\tclGet.obj \
$(TMPDIR)\tclHash.obj \
$(TMPDIR)\tclHistory.obj \
$(TMPDIR)\tclIndexObj.obj \
$(TMPDIR)\tclInterp.obj \
$(TMPDIR)\tclIO.obj \
$(TMPDIR)\tclIOCmd.obj \
$(TMPDIR)\tclIOGT.obj \
$(TMPDIR)\tclIOSock.obj \
$(TMPDIR)\tclIOUtil.obj \
$(TMPDIR)\tclLink.obj \
$(TMPDIR)\tclLiteral.obj \
$(TMPDIR)\tclListObj.obj \
$(TMPDIR)\tclLoad.obj \
$(TMPDIR)\tclMain.obj \
$(TMPDIR)\tclNamesp.obj \
$(TMPDIR)\tclNotify.obj \
$(TMPDIR)\tclObj.obj \
$(TMPDIR)\tclPanic.obj \
$(TMPDIR)\tclParse.obj \
$(TMPDIR)\tclPipe.obj \
$(TMPDIR)\tclPkg.obj \
$(TMPDIR)\tclPkgConfig.obj \
$(TMPDIR)\tclPosixStr.obj \
$(TMPDIR)\tclPreserve.obj \
$(TMPDIR)\tclProc.obj \
$(TMPDIR)\tclRegexp.obj \
$(TMPDIR)\tclResolve.obj \
$(TMPDIR)\tclResult.obj \
$(TMPDIR)\tclScan.obj \
$(TMPDIR)\tclStringObj.obj \
$(TMPDIR)\tclStubInit.obj \
$(TMPDIR)\tclStubLib.obj \
$(TMPDIR)\tclThread.obj \
$(TMPDIR)\tclThreadJoin.obj \
$(TMPDIR)\tclTimer.obj \
$(TMPDIR)\tclTrace.obj \
$(TMPDIR)\tclUtf.obj \
$(TMPDIR)\tclUtil.obj \
$(TMPDIR)\tclVar.obj \
$(TMPDIR)\tclWin32Dll.obj \
$(TMPDIR)\tclWinChan.obj \
$(TMPDIR)\tclWinConsole.obj \
$(TMPDIR)\tclWinSerial.obj \
$(TMPDIR)\tclWinError.obj \
$(TMPDIR)\tclWinFCmd.obj \
$(TMPDIR)\tclWinFile.obj \
$(TMPDIR)\tclWinInit.obj \
$(TMPDIR)\tclWinLoad.obj \
$(TMPDIR)\tclWinNotify.obj \
$(TMPDIR)\tclWinPipe.obj \
$(TMPDIR)\tclWinSock.obj \
$(TMPDIR)\tclWinThrd.obj \
$(TMPDIR)\tclWinTime.obj
TCLSTUBOBJS = $(TMPDIR)\tclStubLib.obj
WINDIR = $(ROOT)\win
GENERICDIR = $(ROOT)\generic
TCL_INCLUDES = -I"$(WINDIR)" -I"$(GENERICDIR)"
TCL_DEFINES = $(DEBUGDEFINES) $(THREADDEFINES) $(SYMDEFINES) \
$(PROFDEFINES) $(OPTDEFINES) $(SIXFOURDEFINES) \
-DTCL_CFGVAL_ENCODING=${CFG_ENCODING}
######################################################################
# Compiler flags
######################################################################
!IF "$(NODEBUG)" == "1"
# these macros cause maximum optimization and no symbols
cdebug = -v- -vi- -O2 -D_DEBUG
!ELSE
# these macros enable debugging
cdebug = -k -Od -r- -v -vi- -y
!ENDIF
SYSDEFINES = _MT;NO_STRICT;_NO_VCL
# declarations common to all compiler options
cbase = -c -q -3 -a4 -g0 -tWM -Ve -Vx -X-
WARNINGS = -w-rch -w-pch -w-par -w-dup -w-pro -w-dpu
ccons = -tWC
INCLUDEPATH = $(include32) $(TCL_INCLUDES)
CFLAGS = $(cdebug) $(cbase) $(INCLUDEPATH) $(WARNINGS) -D$(SYSDEFINES)
TCL_CFLAGS = $(CFLAGS) $(TCL_DEFINES)
CONS_CFLAGS = $(CFLAGS) $(TCL_DEFINES) $(ccons)
######################################################################
# Linker flags
######################################################################
!IF "$(NODEBUG)" == "1"
ldebug =
!ELSE
ldebug = -v
!ENDIF
# declarations common to all linker options
LNFLAGS = -D"" -Gn -I$(TMPDIR) -x $(ldebug) $(libpath32)
# -Gi: create lib file (is -Gl in doc)
# -aa: Windows app, -ap: Windows console app
LNFLAGS_DLL = -ap -Gi -Tpd
LNFLAGS_CONS = -ap -Tpe
LNLIBS = import32 cw32mt
######################################################################
# Project specific targets
######################################################################
release: setup $(TCLSH) dlls
dlls: setup $(TCLPIPEDLL) $(TCLREGDLL) $(TCLDDEDLL)
all: setup $(TCLSH) dlls $(CAT32)
tcltest: setup $(TCLTEST) dlls $(CAT32)
plugin: setup $(TCLPLUGINDLL) $(TCLSHP)
install: install-binaries install-libraries
test: setup $(TCLTEST) dlls $(CAT32)
set TCL_LIBRARY=$(ROOT)/library
$(TCLTEST) $(ROOT)/tests/all.tcl
setup:
@if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR) &\
echo *** Created directory '$(OUT_DIR)'
@if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR) &\
echo *** Created directory '$(TMP_DIR)'
$(TCLLIB): $(TCLDLL)
$(TCLDLL): $(TCLOBJS) $(TMPDIR)\$(NAMEPREFIX).res
$(link32) $(ldebug) $(LNFLAGS) $(LNFLAGS_DLL) $(TOOLS32)\lib\c0d32 @&&!
$(TCLOBJS), $@, -x, $(LNLIBS),, $(TMPDIR)\$(NAMEPREFIX).res
!
$(TCLSTUBLIB): $(TCLSTUBOBJS)
$(lib32) /u $@ $(TCLSTUBOBJS)
$(TCLPLUGINLIB): $(TCLPLUGINDLL)
$(TCLPLUGINDLL): $(TCLOBJS) $(TMPDIR)\tcl.res
$(link32) $(ldebug) $(dlllflags) \
-out:$@ $(TMPDIR)\tcl.res $(guilibsdll) @&&!
$(TCLOBJS)
!
$(TCLSH): $(TCLSHOBJS) $(TCLLIB) $(TMPDIR)\$(NAMEPREFIX)sh.res
$(link32) $(ldebug) -S:2400000 $(LNFLAGS) $(LNFLAGS_CONS) $(TOOLS32)\lib\c0x32 @&&!
$(TCLSHOBJS), $@, -x, $(LNLIBS) $(TCLLIB),, $(TMPDIR)\$(NAMEPREFIX)sh.res
!
$(TCLSHP): $(TCLSHOBJS) $(TCLPLUGINLIB) $(TMPDIR)\tclsh.res
$(link32) $(ldebug) $(conlflags) $(TMPDIR)\tclsh.res -stack:2300000 \
-out:$@ $(conlibsdll) $(TCLPLUGINLIB) $(TCLSHOBJS)
$(TCLTEST): $(TCLTESTOBJS) $(TCLLIB) $(TMPDIR)\$(NAMEPREFIX)sh.res
$(link32) $(ldebug) -S:2400000 $(LNFLAGS) $(LNFLAGS_CONS) $(TOOLS32)\lib\c0x32 @&&!
$(TCLTESTOBJS), $@, -x, $(LNLIBS) $(TCLLIB),, $(TMPDIR)\$(NAMEPREFIX)sh.res
!
$(TCLPIPEDLL): $(WINDIR)\stub16.c
$(cc32) $(CFLAGS) -o$(TMPDIR)\stub16.obj $(WINDIR)\stub16.c
$(link32) $(ldebug) $(LNFLAGS) $(LNFLAGS_CONS) $(TOOLS32)\lib\c0x32 \
$(TMPDIR)\stub16.obj, $@, -x, $(LNLIBS),, $(TMPDIR)\$(NAMEPREFIX).res
$(TCLDDEDLL): $(TMPDIR)\tclWinDde.obj $(TCLSTUBLIB)
$(link32) $(ldebug) $(LNFLAGS) $(LNFLAGS_DLL) $(TOOLS32)\lib\c0d32 \
$(TMPDIR)\tclWinDde.obj, $@, -x, $(LNLIBS) $(TCLSTUBLIB),, \
$(TMPDIR)\$(NAMEPREFIX).res
$(TCLREGDLL): $(TMPDIR)\tclWinReg.obj $(TCLSTUBLIB)
$(link32) $(ldebug) $(LNFLAGS) $(LNFLAGS_DLL) $(TOOLS32)\lib\c0d32 \
$(TMPDIR)\tclWinReg.obj, $@, -x, $(LNLIBS) $(TCLSTUBLIB),, \
$(TMPDIR)\$(NAMEPREFIX).res
$(CAT32): $(WINDIR)\cat.c
$(cc32) $(CONS_CFLAGS) -o$(TMPDIR)\cat.obj $?
$(link32) $(ldebug) $(LNFLAGS) $(LNFLAGS_CONS) $(TOOLS32)\lib\c0x32 \
$(TMPDIR)\cat.obj, $@, -x, $(LNLIBS),,
install-binaries: $(TCLSH)
$(MKDIR) "$(BIN_INSTALL_DIR)"
$(MKDIR) "$(LIB_INSTALL_DIR)"
@echo installing $(TCLDLLNAME)
@copy "$(TCLDLL)" "$(BIN_INSTALL_DIR)"
@copy "$(TCLLIB)" "$(LIB_INSTALL_DIR)"
@echo installing "$(TCLSH)"
@copy "$(TCLSH)" "$(BIN_INSTALL_DIR)"
@echo installing $(TCLPIPEDLLNAME)
@copy "$(TCLPIPEDLL)" "$(BIN_INSTALL_DIR)"
@echo installing $(TCLSTUBLIBNAME)
@copy "$(TCLSTUBLIB)" "$(LIB_INSTALL_DIR)"
install-libraries:
-@$(MKDIR) "$(LIB_INSTALL_DIR)"
-@$(MKDIR) "$(INCLUDE_INSTALL_DIR)"
-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)"
@echo installing http1.0
-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\http1.0"
-@copy "$(ROOT)\library\http1.0\http.tcl" "$(SCRIPT_INSTALL_DIR)\http1.0"
-@copy "$(ROOT)\library\http1.0\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\http1.0"
@echo installing http2.7
-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\http2.7"
-@copy "$(ROOT)\library\http\http.tcl" "$(SCRIPT_INSTALL_DIR)\http2.7"
-@copy "$(ROOT)\library\http\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\http2.7"
@echo installing opt0.4
-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\opt0.4"
-@copy "$(ROOT)\library\opt\optparse.tcl" "$(SCRIPT_INSTALL_DIR)\opt0.4"
-@copy "$(ROOT)\library\opt\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\opt0.4"
@echo installing msgcat1.4
-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\msgcat1.4"
-@copy "$(ROOT)\library\msgcat\msgcat.tcl" "$(SCRIPT_INSTALL_DIR)\msgcat1.4"
-@copy "$(ROOT)\library\msgcat\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\msgcat1.4"
@echo installing tcltest2.3
-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\tcltest2.3"
-@copy "$(ROOT)\library\tcltest\tcltest.tcl" "$(SCRIPT_INSTALL_DIR)\tcltest2.3"
-@copy "$(ROOT)\library\tcltest\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\tcltest2.3"
@echo installing platform1.0
-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\platform1.0"
-@copy "$(ROOT)\library\platform\platform.tcl" "$(SCRIPT_INSTALL_DIR)\platform1.0"
-@copy "$(ROOT)\library\platform\shell.tcl" "$(SCRIPT_INSTALL_DIR)\platform1.0"
-@copy "$(ROOT)\library\platform\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\platform1.0"
@echo installing $(TCLDDEDLLNAME)
-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\dde1.3"
-@copy "$(TCLDDEDLL)" "$(SCRIPT_INSTALL_DIR)\dde1.3"
-@copy "$(ROOT)\library\dde\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\dde1.3"
@echo installing $(TCLREGDLLNAME)
-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\reg1.2"
-@copy "$(TCLREGDLL)" "$(SCRIPT_INSTALL_DIR)\reg1.2"
-@copy "$(ROOT)\library\reg\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\reg1.2"
@echo installing encoding files
-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\encoding"
-@copy "$(ROOT)\library\encoding\*.enc" "$(SCRIPT_INSTALL_DIR)\encoding"
@echo installing library files
-@copy "$(GENERICDIR)\tcl.h" "$(INCLUDE_INSTALL_DIR)"
-@copy "$(GENERICDIR)\tclDecls.h" "$(INCLUDE_INSTALL_DIR)"
-@copy "$(GENERICDIR)\tclPlatDecls.h" "$(INCLUDE_INSTALL_DIR)"
-@copy "$(ROOT)\library\history.tcl" "$(SCRIPT_INSTALL_DIR)"
-@copy "$(ROOT)\library\init.tcl" "$(SCRIPT_INSTALL_DIR)"
-@copy "$(ROOT)\library\parray.tcl" "$(SCRIPT_INSTALL_DIR)"
-@copy "$(ROOT)\library\safe.tcl" "$(SCRIPT_INSTALL_DIR)"
-@copy "$(ROOT)\library\tclIndex" "$(SCRIPT_INSTALL_DIR)"
-@copy "$(ROOT)\library\package.tcl" "$(SCRIPT_INSTALL_DIR)"
-@copy "$(ROOT)\library\word.tcl" "$(SCRIPT_INSTALL_DIR)"
-@copy "$(ROOT)\library\auto.tcl" "$(SCRIPT_INSTALL_DIR)"
#
# Regenerate the stubs files.
#
genstubs:
tclsh$(VERSION) $(ROOT)\tools\genStubs.tcl $(GENERICDIR) \
$(GENERICDIR)\tcl.decls $(GENERICDIR)\tclInt.decls
#
# Regenerate the windows help files.
#
TCLTOOLS = $(ROOT)/tools
MAN2TCL = $(TCLTOOLS)/man2tcl
TCLRTF = $(TCLTOOLS)/tcl.rtf
TCLHPJ = $(TCLTOOLS)/tcl.hpj
MAN2HELP = $(TCLTOOLS)/man2help.tcl
HCRTF = $(TOOLS32)/bin/hcrtf.exe
winhelp: $(TCLRTF)
cd $(TCLTOOLS)
start /wait $(HCRTF) -xn $(TCLHPJ)
$(MAN2TCL).exe: $(MAN2TCL).obj
cd $(TCLTOOLS)
$(cc32) /nologo /G4 /ML /O2 $(MAN2TCL).c
$(TCLRTF): $(MAN2TCL).exe $(TCLSH)
cd $(TCLTOOLS)
..\win\$(TCLSH) $(MAN2HELP) $(NAMEPREFIX) $(VERSION) $(ROOT)/doc ../../tk$(DOTVERSION)/doc
#
# Special case object file targets
#
$(TMPDIR)\tclWinInit.obj: $(WINDIR)\tclWinInit.c
$(cc32) -DBUILD_tcl $(TCL_CFLAGS) -o$(TMPDIR)\$@ $?
$(TMPDIR)\testMain.obj: $(WINDIR)\tclAppInit.c
$(cc32) $(TCL_CFLAGS) -DTCL_TEST -o$(TMPDIR)\testMain.obj $?
$(TMPDIR)\tclTest.obj: $(GENERICDIR)\tclTest.c
$(cc32) $(TCL_CFLAGS) -o$(TMPDIR)\$@ $?
$(TMPDIR)\tclTestObj.obj: $(GENERICDIR)\tclTestObj.c
$(cc32) $(TCL_CFLAGS) -o$(TMPDIR)\$@ $?
$(TMPDIR)\tclWinTest.obj: $(WINDIR)\tclWinTest.c
$(cc32) $(TCL_CFLAGS) -o$(TMPDIR)\$@ $?
$(TMP_DIR)\tclPkgConfig.obj: $(GENERICDIR)\tclPkgConfig.c
$(cc32) $(TCL_CFLAGS) \
-DCFG_INSTALL_EXEC_PREFIX=\"$(INSTALL_EXEC_PREFIX)\" \
-DCFG_INSTALL_PREFIX=\"$(INSTALL_PREFIX)\" \
-DCFG_RUNTIME_EXEC_PREFIX=\"$(RUNTIME_EXEC_PREFIX)\" \
-DCFG_RUNTIME_PREFIX=\"$(RUNTIME_PREFIX)\" \
-o$(TMPDIR)\$@ $?
$(TMPDIR)\tclAppInit.obj : $(WINDIR)\tclAppInit.c
$(cc32) $(TCL_CFLAGS) -o$(TMPDIR)\$@ $?
# The following objects should be built using the stub interfaces
# tclWinReg: Produces errors in ANSI mode
$(TMPDIR)\tclWinReg.obj : $(WINDIR)\tclWinReg.c
$(cc32) $(TCL_CFLAGS) -DUSE_TCL_STUBS -o$(TMPDIR)\$@ $?
# tclWinDde: Produces errors in ANSI mode
$(TMPDIR)\tclWinDde.obj : $(WINDIR)\tclWinDde.c
$(cc32) $(TCL_CFLAGS) -DUSE_TCL_STUBS -o$(TMPDIR)\$@ $?
# The following objects are part of the stub library and should not
# be built as DLL objects but none of the symbols should be exported
$(TMPDIR)\tclStubLib.obj : $(GENERICDIR)\tclStubLib.c
$(cc32) $(TCL_CFLAGS) -DSTATIC_BUILD -o$(TMPDIR)\$@ $?
# Dedependency rules
$(GENERICDIR)\regcomp.c: \
$(GENERICDIR)\regguts.h \
$(GENERICDIR)\regc_lex.c \
$(GENERICDIR)\regc_color.c \
$(GENERICDIR)\regc_nfa.c \
$(GENERICDIR)\regc_cvec.c \
$(GENERICDIR)\regc_locale.c
$(GENERICDIR)\regcustom.h: \
$(GENERICDIR)\tclInt.h \
$(GENERICDIR)\tclPort.h \
$(GENERICDIR)\regex.h
$(GENERICDIR)\regexec.c: \
$(GENERICDIR)\rege_dfa.c \
$(GENERICDIR)\regguts.h
$(GENERICDIR)\regerror.c: $(GENERICDIR)\regguts.h
$(GENERICDIR)\regfree.c: $(GENERICDIR)\regguts.h
$(GENERICDIR)\regfronts.c: $(GENERICDIR)\regguts.h
$(GENERICDIR)\regguts.h: $(GENERICDIR)\regcustom.h
#
# Implicit rules
#
{$(WINDIR)}.c{$(TMPDIR)}.obj:
$(cc32) -DBUILD_tcl $(TCL_CFLAGS) -o$@ $<
{$(GENERICDIR)}.c{$(TMPDIR)}.obj:
$(cc32) -DBUILD_tcl $(TCL_CFLAGS) -o$@ $<
{$(ROOT)\compat}.c{$(TMPDIR)}.obj:
$(cc32) -DBUILD_tcl $(TCL_CFLAGS) -o$@ $<
{$(WINDIR)}.rc{$(TMPDIR)}.res:
$(rc32) $(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
clean:
-@$(RM) $(OUTDIR)\*.exp
-@$(RM) $(OUTDIR)\*.lib
-@$(RM) $(OUTDIR)\*.dll
-@$(RM) $(OUTDIR)\*.exe
-@$(RM) $(OUTDIR)\*.pdb
-@$(RM) $(TMPDIR)\*.pch
-@$(RM) $(TMPDIR)\*.obj
-@$(RM) $(TMPDIR)\*.res
-@$(RM) $(TMPDIR)\*.exe
-@$(RMDIR) $(OUTDIR)
-@$(RMDIR) $(TMPDIR)
|
