Dec 5, 2000
Dave Steck
Novell, Inc.
UTF-8 Conversion Functions
1. Strings in the LDAP C SDK should be encoded in UTF-8 format.
However, most platforms do not provide APIs for converting to
this format. If they do, they are platform-specific.
As a result, most applications (knowingly or not) use local strings
with LDAP functions. This works fine for 7-bit ASCII characters,
but will fail with 8-bit European characters, Asian characters, etc.
We propose adding the following platform-independent conversion functions
to the OpenLDAP SDK. There are 4 functions for converting between UTF-8
and wide characters, and 4 functions for converting between UTF-8 and
multibyte characters.
For multibyte to UTF-8 conversions, charset translation is necessary.
While a full charset translator is not practical or appropriate for the
LDAP SDK, we can pass the translator function in as an argument.
A NULL for this argument will use the ANSI C functions mbtowc, mbstowcs,
wctomb, and wcstombs.
2. UTF-8 <--> Wide Character conversions
The following new conversion routines will be added, following the pattern of
the ANSI C conversion routines (mbtowc, mbstowcs, etc). These routines use
the wchar_t type. wchar_t is 2 bytes on some systems and 4 bytes on others.
However the advantage of using wchar_t is that all the standard wide character
string functions may be used on these strings: wcslen, wcscpy, etc.
int ldap_x_utf8_to_wc - Convert a single UTF-8 encoded character to a wide character.
int ldap_x_utf8s_to_wcs - Convert a UTF-8 string to a wide character string.
int ldap_x_wc_to_utf8 - Convert a single wide character to a UTF-8 sequence.
int ldap_x_wcs_to_utf8s - Convert a wide character string to a UTF-8 string.
2.1 ldap_x_utf8_to_wc - Convert a single UTF-8 encoded character to a wide character.
int ldap_x_utf8_to_wc ( wchar_t *wchar, const char *utf8char )
wchar (OUT) Points to a wide character code to receive the
converted character.
utf8char (IN) Address of the UTF8 sequence of bytes.
Return Value:
If successful, the function returns the length in
bytes of the UTF-8 input character.
If utf8char is NULL or points to an empty string, the
function returns 1 and a NULL is written to wchar.
If utf8char contains an invalid UTF-8 sequence -1 is returned.
2.2 ldap_x_utf8s_to_wcs - Convert a UTF-8 string to a wide character string.
int ldap_x_utf8s_to_wcs (wchar_t *wcstr, const char *utf8str, size_t count)
wcstr (OUT) Points to a wide char buffer to receive the
converted wide char string. The output string will be
null terminated if there is space for it in the
buffer.
utf8str (IN) Address of the null-terminated UTF-8 string to convert.
count (IN) The number of UTF-8 characters to convert, or
equivalently, the size of the output buffer in wide
characters.
Return Value:
If successful, the function returns the number of wide
characters written to wcstr, excluding the null termination
character, if any.
If wcstr is NULL, the function returns the number of wide
characters required to contain the converted string,
excluding the null termination character.
If an invalid UTF-8 sequence is encountered, the
function returns -1.
If the return value equals count, there was not enough space to fit the
string and the null terminator in the buffer.
2.3 ldap_x_wc_to_utf8 - Convert a single wide character to a UTF-8 sequence.
int ldap_x_wc_to_utf8 ( char *utf8char, wchar_t wchar, count )
utf8char (OUT) Points to a byte array to receive the converted UTF-8
string.
wchar (IN) The wide character to convert.
count (IN) The maximum number of bytes to write to the output
buffer. Normally set this to LDAP_MAX_UTF8_LEN, which
is defined as 3 or 6 depending on the size of wchar_t.
A partial character will not be written.
Return Value:
If successful, the function returns the length in bytes of
the converted UTF-8 output character.
If wchar is NULL, the function returns 1 and a NULL is
written to utf8char.
If wchar cannot be converted to a UTF-8 character, the
function returns -1.
2.4 int ldap_x_wcs_to_utf8s - Convert a wide character string to a UTF-8 string.
int ldap_x_wcs_to_utf8s (char *utf8str, const wchar_t *wcstr, size_t count)
utf8str (OUT) Points to a byte array to receive the converted
UTF-8 string. The output string will be null
terminated if there is space for it in the
buffer.
wcstr (IN) Address of the null-terminated wide char string to convert.
count (IN) The size of the output buffer in bytes.
Return Value:
If successful, the function returns the number of bytes
written to utf8str, excluding the null termination
character, if any.
If utf8str is NULL, the function returns the number of
bytes required to contain the converted string, excluding
the null termination character. The 'count' parameter is ignored.
If the function encounters a wide character that cannot
be mapped to a UTF-8 sequence, the function returns -1.
If the return value equals count, there was not enough space to fit
the string and the null terminator in the buffer.
3. Multi-byte <--> UTF-8 Conversions
These functions convert the string in a two-step process, from multibyte
to Wide, then from Wide to UTF8, or vice versa. This conversion requires a
charset translation routine, which is passed in as an argument.
ldap_x_mb_to_utf8 - Convert a multi-byte character to a UTF-8 character.
ldap_x_mbs_to_utf8s - Convert a multi-byte string to a UTF-8 string.
ldap_x_utf8_to_mb - Convert a UTF-8 character to a multi-byte character.
ldap_x_utf8s_to_mbs - Convert a UTF-8 string to a multi-byte string.
3.1 ldap_x_mb_to_utf8 - Convert a multi-byte character to a UTF-8 character.
int ldap_x_mb_to_utf8 ( char *utf8char, const char *mbchar, size_t mbsize, int (*f_mbtowc)(wchar_t *wchar, const char *mbchar, size_t count) )
utf8char (OUT) Points to a byte buffer to receive the converted
UTF-8 character. May be NULL. The output is not
null-terminated.
mbchar (IN) Address of a sequence of bytes forming a multibyte character.
mbsize (IN) The maximum number of bytes of the mbchar argument to
check. This should normally be MB_CUR_MAX.
f_mbtowc (IN) The function to use for converting a multibyte
character to a wide character. If NULL, the local
ANSI C routine mbtowc is used.
Return Value:
If successful, the function returns the length in bytes of
the UTF-8 output character.
If utf8char is NULL, count is ignored and the funtion
returns the number of bytes that would be written to the
output char.
If count is zero, 0 is returned and nothing is written to
utf8char.
If mbchar is NULL or points to an empty string, the
function returns 1 and a null byte is written to utf8char.
If mbchar contains an invalid multi-byte character, -1 is returned.
3.2 ldap_x_mbs_to_utf8s - Convert a multi-byte string to a UTF-8 string.
int ldap_x_mbs_to_utf8s (char *utf8str, const char *mbstr, size_t count,
size_t (*f_mbstowcs)(wchar_t *wcstr, const char *mbstr, size_t count))
utf8str (OUT) Points to a buffer to receive the converted UTF-8 string.
May be NULL.
mbchar (IN) Address of the null-terminated multi-byte input string.
count (IN) The size of the output buffer in bytes.
f_mbstowcs (IN) The function to use for converting a multibyte string
to a wide character string. If NULL, the local ANSI
C routine mbstowcs is used.
Return Value:
If successful, the function returns the length in
bytes of the UTF-8 output string, excluding the null
terminator, if present.
If utf8str is NULL, count is ignored and the function
returns the number of bytes required for the output string,
excluding the NULL.
If count is zero, 0 is returned and nothing is written to utf8str.
If mbstr is NULL or points to an empty string, the
function returns 1 and a null byte is written to utf8str.
If mbstr contains an invalid multi-byte character, -1 is returned.
If the returned value is equal to count, the entire null-terminated
string would not fit in the output buffer.
3.3 ldap_x_utf8_to_mb - Convert a UTF-8 character to a multi-byte character.
int ldap_x_utf8_to_mb ( char *mbchar, const char *utf8char,
int (*f_wctomb)(char *mbchar, wchar_t wchar) )
mbchar (OUT) Points to a byte buffer to receive the converted multi-byte
character. May be NULL.
utf8char (IN) Address of the UTF-8 character sequence.
f_wctomb (IN) The function to use for converting a wide character
to a multibyte character. If NULL, the local
ANSI C routine wctomb is used.
Return Value:
If successful, the function returns the length in
bytes of the multi-byte output character.
If utf8char is NULL or points to an empty string, the
function returns 1 and a null byte is written to mbchar.
If utf8char contains an invalid UTF-8 sequence, -1 is returned.
3.4 int ldap_x_utf8s_to_mbs - Convert a UTF-8 string to a multi-byte string.
int ldap_x_utf8s_to_mbs ( char *mbstr, const char *utf8str, size_t count,
size_t (*f_wcstombs)(char *mbstr, const wchar_t *wcstr, size_t count) )
mbstr (OUT) Points to a byte buffer to receive the converted
multi-byte string. May be NULL.
utf8str (IN) Address of the null-terminated UTF-8 string to convert.
count (IN) The size of the output buffer in bytes.
f_wcstombs (IN) The function to use for converting a wide character
string to a multibyte string. If NULL, the local
ANSI C routine wcstombs is used.
Return Value:
If successful, the function returns the number of bytes
written to mbstr, excluding the null termination
character, if any.
If mbstr is NULL, count is ignored and the funtion
returns the number of bytes required for the output string,
excluding the NULL.
If count is zero, 0 is returned and nothing is written to
mbstr.
If utf8str is NULL or points to an empty string, the
function returns 1 and a null byte is written to mbstr.
If an invalid UTF-8 character is encountered, the
function returns -1.
The output string will be null terminated if there is space for it in
the output buffer.
|
