/*
* Intel 82557 Fast Ethernet PCI Bus LAN Controller
* as found on the Intel EtherExpress PRO/100B. This chip is full
* of smarts, unfortunately none of them are in the right place.
* To do:
* the PCI scanning code could be made common to other adapters;
* PCI code needs rewritten to handle byte, word, dword accesses
* and using the devno as a bus+dev+function triplet.
*/
#include "u.h"
#include "lib.h"
#include "mem.h"
#include "dat.h"
#include "fns.h"
#include "io.h"
#include "etherif.h"
enum {
Nrfd = 4, /* receive frame area */
NullPointer = 0xFFFFFFFF, /* 82557 NULL pointer */
};
enum { /* CSR */
Status = 0x00, /* byte or word (word includes Ack) */
Ack = 0x01, /* byte */
CommandR = 0x02, /* byte or word (word includes Interrupt) */
Interrupt = 0x03, /* byte */
Pointer = 0x04, /* dword */
Port = 0x08, /* dword */
Fcr = 0x0C, /* Flash control register */
Ecr = 0x0E, /* EEPROM control register */
Mcr = 0x10, /* MDI control register */
};
enum { /* Status */
RUidle = 0x0000,
RUsuspended = 0x0004,
RUnoresources = 0x0008,
RUready = 0x0010,
RUrbd = 0x0020, /* bit */
RUstatus = 0x003F, /* mask */
CUidle = 0x0000,
CUsuspended = 0x0040,
CUactive = 0x0080,
CUstatus = 0x00C0, /* mask */
StatSWI = 0x0400, /* SoftWare generated Interrupt */
StatMDI = 0x0800, /* MDI r/w done */
StatRNR = 0x1000, /* Receive unit Not Ready */
StatCNA = 0x2000, /* Command unit Not Active (Active->Idle) */
StatFR = 0x4000, /* Finished Receiving */
StatCX = 0x8000, /* Command eXecuted */
StatTNO = 0x8000, /* Transmit NOT OK */
};
enum { /* Command (byte) */
CUnop = 0x00,
CUstart = 0x10,
CUresume = 0x20,
LoadDCA = 0x40, /* Load Dump Counters Address */
DumpSC = 0x50, /* Dump Statistical Counters */
LoadCUB = 0x60, /* Load CU Base */
ResetSA = 0x70, /* Dump and Reset Statistical Counters */
RUstart = 0x01,
RUresume = 0x02,
RUabort = 0x04,
LoadHDS = 0x05, /* Load Header Data Size */
LoadRUB = 0x06, /* Load RU Base */
RBDresume = 0x07, /* Resume frame reception */
};
enum { /* Interrupt (byte) */
InterruptM = 0x01, /* interrupt Mask */
InterruptSI = 0x02, /* Software generated Interrupt */
};
enum { /* Ecr */
EEsk = 0x01, /* serial clock */
EEcs = 0x02, /* chip select */
EEdi = 0x04, /* serial data in */
EEdo = 0x08, /* serial data out */
EEstart = 0x04, /* start bit */
EEread = 0x02, /* read opcode */
};
enum { /* Mcr */
MDIread = 0x08000000, /* read opcode */
MDIwrite = 0x04000000, /* write opcode */
MDIready = 0x10000000, /* ready bit */
MDIie = 0x20000000, /* interrupt enable */
};
typedef struct Rfd {
int field;
ulong link;
ulong rbd;
ushort count;
ushort size;
Etherpkt;
} Rfd;
enum { /* field */
RfdCollision = 0x00000001,
RfdIA = 0x00000002, /* IA match */
RfdRxerr = 0x00000010, /* PHY character error */
RfdType = 0x00000020, /* Type frame */
RfdRunt = 0x00000080,
RfdOverrun = 0x00000100,
RfdBuffer = 0x00000200,
RfdAlignment = 0x00000400,
RfdCRC = 0x00000800,
RfdOK = 0x00002000, /* frame received OK */
RfdC = 0x00008000, /* reception Complete */
RfdSF = 0x00080000, /* Simplified or Flexible (1) Rfd */
RfdH = 0x00100000, /* Header RFD */
RfdI = 0x20000000, /* Interrupt after completion */
RfdS = 0x40000000, /* Suspend after completion */
RfdEL = 0x80000000, /* End of List */
};
enum { /* count */
RfdF = 0x00004000,
RfdEOF = 0x00008000,
};
typedef struct Cb {
int command;
ulong link;
uchar data[24]; /* CbIAS + CbConfigure */
} Cb;
typedef struct TxCB {
int command;
ulong link;
ulong tbd;
ushort count;
uchar threshold;
uchar number;
} TxCB;
enum { /* action command */
CbOK = 0x00002000, /* DMA completed OK */
CbC = 0x00008000, /* execution Complete */
CbNOP = 0x00000000,
CbIAS = 0x00010000, /* Indvidual Address Setup */
CbConfigure = 0x00020000,
CbMAS = 0x00030000, /* Multicast Address Setup */
CbTransmit = 0x00040000,
CbDump = 0x00060000,
CbDiagnose = 0x00070000,
CbCommand = 0x00070000, /* mask */
CbSF = 0x00080000, /* CbTransmit */
CbI = 0x20000000, /* Interrupt after completion */
CbS = 0x40000000, /* Suspend after completion */
CbEL = 0x80000000, /* End of List */
};
enum { /* CbTransmit count */
CbEOF = 0x00008000,
};
typedef struct Ctlr Ctlr;
typedef struct Ctlr {
int port;
Pcidev* pcidev;
Ctlr* next;
int active;
int eepromsz; /* address size in bits */
ushort* eeprom;
int ctlrno;
char* type;
uchar configdata[24];
Rfd rfd[Nrfd];
int rfdl;
int rfdx;
Block* cbqhead;
Block* cbqtail;
int cbqbusy;
} Ctlr;
static Ctlr* ctlrhead;
static Ctlr* ctlrtail;
static uchar configdata[24] = {
0x16, /* byte count */
0x44, /* Rx/Tx FIFO limit */
0x00, /* adaptive IFS */
0x00,
0x04, /* Rx DMA maximum byte count */
0x84, /* Tx DMA maximum byte count */
0x33, /* late SCB, CNA interrupts */
0x01, /* discard short Rx frames */
0x00, /* 503/MII */
0x00,
0x2E, /* normal operation, NSAI */
0x00, /* linear priority */
0x60, /* inter-frame spacing */
0x00,
0xF2,
0x48, /* promiscuous mode off */
0x00,
0x40,
0xF2, /* transmit padding enable */
0x80, /* full duplex pin enable */
0x3F, /* no Multi IA */
0x05, /* no Multi Cast ALL */
};
#define csr8r(c, r) (inb((c)->port+(r)))
#define csr16r(c, r) (ins((c)->port+(r)))
#define csr32r(c, r) (inl((c)->port+(r)))
#define csr8w(c, r, b) (outb((c)->port+(r), (int)(b)))
#define csr16w(c, r, w) (outs((c)->port+(r), (ushort)(w)))
#define csr32w(c, r, l) (outl((c)->port+(r), (ulong)(l)))
static void
custart(Ctlr* ctlr)
{
if(ctlr->cbqhead == 0){
ctlr->cbqbusy = 0;
return;
}
ctlr->cbqbusy = 1;
csr32w(ctlr, Pointer, PADDR(ctlr->cbqhead->rp));
while(csr8r(ctlr, CommandR))
;
csr8w(ctlr, CommandR, CUstart);
}
static void
action(Ctlr* ctlr, Block* bp)
{
Cb *cb;
cb = (Cb*)bp->rp;
cb->command |= CbEL;
if(ctlr->cbqhead){
ctlr->cbqtail->next = bp;
cb = (Cb*)ctlr->cbqtail->rp;
cb->link = PADDR(bp->rp);
cb->command &= ~CbEL;
}
else
ctlr->cbqhead = bp;
ctlr->cbqtail = bp;
if(ctlr->cbqbusy == 0)
custart(ctlr);
}
static void
attach(Ether* ether)
{
int status;
Ctlr *ctlr;
ctlr = ether->ctlr;
status = csr16r(ctlr, Status);
if((status & RUstatus) == RUidle){
csr32w(ctlr, Pointer, PADDR(&ctlr->rfd[ctlr->rfdx]));
while(csr8r(ctlr, CommandR))
;
csr8w(ctlr, CommandR, RUstart);
}
}
static void
configure(void* arg, int promiscuous)
{
Ctlr *ctlr;
Block *bp;
Cb *cb;
ctlr = ((Ether*)arg)->ctlr;
bp = allocb(sizeof(Cb));
cb = (Cb*)bp->rp;
bp->wp += sizeof(Cb);
cb->command = CbConfigure;
cb->link = NullPointer;
memmove(cb->data, ctlr->configdata, sizeof(ctlr->configdata));
if(promiscuous)
cb->data[15] |= 0x01;
action(ctlr, bp);
}
static void
transmit(Ether* ether)
{
Block *bp;
TxCB *txcb;
RingBuf *tb;
for(tb = ðer->tb[ether->ti]; tb->owner == Interface; tb = ðer->tb[ether->ti]){
bp = allocb(tb->len+sizeof(TxCB));
txcb = (TxCB*)bp->wp;
bp->wp += sizeof(TxCB);
txcb->command = CbTransmit;
txcb->link = NullPointer;
txcb->tbd = NullPointer;
txcb->count = CbEOF|tb->len;
txcb->threshold = 2;
txcb->number = 0;
memmove(bp->wp, tb->pkt, tb->len);
memmove(bp->wp+Eaddrlen, ether->ea, Eaddrlen);
bp->wp += tb->len;
action(ether->ctlr, bp);
tb->owner = Host;
ether->ti = NEXT(ether->ti, ether->ntb);
}
}
static void
interrupt(Ureg*, void* arg)
{
Rfd *rfd;
Block *bp;
Ctlr *ctlr;
Ether *ether;
int status;
RingBuf *rb;
ether = arg;
ctlr = ether->ctlr;
for(;;){
status = csr16r(ctlr, Status);
csr8w(ctlr, Ack, (status>>8) & 0xFF);
if((status & (StatCX|StatFR|StatCNA|StatRNR)) == 0)
return;
if(status & StatFR){
rfd = &ctlr->rfd[ctlr->rfdx];
while(rfd->field & RfdC){
rb = ðer->rb[ether->ri];
if(rb->owner == Interface){
rb->owner = Host;
rb->len = rfd->count & 0x3FFF;
memmove(rb->pkt, rfd->d, rfd->count & 0x3FFF);
ether->ri = NEXT(ether->ri, ether->nrb);
}
/*
* Reinitialise the frame for reception and bump
* the receive frame processing index;
* bump the sentinel index, mark the new sentinel
* and clear the old sentinel suspend bit;
* set bp and rfd for the next receive frame to
* process.
*/
rfd->field = 0;
rfd->count = 0;
ctlr->rfdx = NEXT(ctlr->rfdx, Nrfd);
rfd = &ctlr->rfd[ctlr->rfdl];
ctlr->rfdl = NEXT(ctlr->rfdl, Nrfd);
ctlr->rfd[ctlr->rfdl].field |= RfdS;
rfd->field &= ~RfdS;
rfd = &ctlr->rfd[ctlr->rfdx];
}
status &= ~StatFR;
}
if(status & StatRNR){
while(csr8r(ctlr, CommandR))
;
csr8w(ctlr, CommandR, RUresume);
status &= ~StatRNR;
}
if(status & StatCNA){
while(bp = ctlr->cbqhead){
if((((Cb*)bp->rp)->command & CbC) == 0)
break;
ctlr->cbqhead = bp->next;
freeb(bp);
}
custart(ctlr);
status &= ~StatCNA;
}
if(status & (StatCX|StatFR|StatCNA|StatRNR|StatMDI|StatSWI))
panic("%s#%d: status %uX\n", ctlr->type, ctlr->ctlrno, status);
}
}
static void
ctlrinit(Ctlr* ctlr)
{
int i;
Rfd *rfd;
ulong link;
link = NullPointer;
for(i = Nrfd-1; i >= 0; i--){
rfd = &ctlr->rfd[i];
rfd->field = 0;
rfd->link = link;
link = PADDR(rfd);
rfd->rbd = NullPointer;
rfd->count = 0;
rfd->size = sizeof(Etherpkt);
}
ctlr->rfd[Nrfd-1].link = PADDR(&ctlr->rfd[0]);
ctlr->rfdl = 0;
ctlr->rfd[0].field |= RfdS;
ctlr->rfdx = 2;
memmove(ctlr->configdata, configdata, sizeof(configdata));
}
static int
miir(Ctlr* ctlr, int phyadd, int regadd)
{
int mcr, timo;
csr32w(ctlr, Mcr, MDIread|(phyadd<<21)|(regadd<<16));
mcr = 0;
for(timo = 64; timo; timo--){
mcr = csr32r(ctlr, Mcr);
if(mcr & MDIready)
break;
microdelay(1);
}
if(mcr & MDIready)
return mcr & 0xFFFF;
return -1;
}
static int
miiw(Ctlr* ctlr, int phyadd, int regadd, int data)
{
int mcr, timo;
csr32w(ctlr, Mcr, MDIwrite|(phyadd<<21)|(regadd<<16)|(data & 0xFFFF));
mcr = 0;
for(timo = 64; timo; timo--){
mcr = csr32r(ctlr, Mcr);
if(mcr & MDIready)
break;
microdelay(1);
}
if(mcr & MDIready)
return 0;
return -1;
}
static int
hy93c46r(Ctlr* ctlr, int r)
{
int data, i, op, size;
/*
* Hyundai HY93C46 or equivalent serial EEPROM.
* This sequence for reading a 16-bit register 'r'
* in the EEPROM is taken straight from Section
* 3.3.4.2 of the Intel 82557 User's Guide.
*/
reread:
csr16w(ctlr, Ecr, EEcs);
op = EEstart|EEread;
for(i = 2; i >= 0; i--){
data = (((op>>i) & 0x01)<<2)|EEcs;
csr16w(ctlr, Ecr, data);
csr16w(ctlr, Ecr, data|EEsk);
microdelay(1);
csr16w(ctlr, Ecr, data);
microdelay(1);
}
/*
* First time through must work out the EEPROM size.
*/
if((size = ctlr->eepromsz) == 0)
size = 8;
for(size = size-1; size >= 0; size--){
data = (((r>>size) & 0x01)<<2)|EEcs;
csr16w(ctlr, Ecr, data);
csr16w(ctlr, Ecr, data|EEsk);
delay(1);
csr16w(ctlr, Ecr, data);
microdelay(1);
if(!(csr16r(ctlr, Ecr) & EEdo))
break;
}
data = 0;
for(i = 15; i >= 0; i--){
csr16w(ctlr, Ecr, EEcs|EEsk);
microdelay(1);
if(csr16r(ctlr, Ecr) & EEdo)
data |= (1<<i);
csr16w(ctlr, Ecr, EEcs);
microdelay(1);
}
csr16w(ctlr, Ecr, 0);
if(ctlr->eepromsz == 0){
ctlr->eepromsz = 8-size;
ctlr->eeprom = malloc((1<<ctlr->eepromsz)*sizeof(ushort));
goto reread;
}
return data;
}
static void
i82557pci(void)
{
Pcidev *p;
Ctlr *ctlr;
p = nil;
while(p = pcimatch(p, 0x8086, 0)){
switch(p->did){
default:
continue;
case 0x1209: /* Intel 82559ER */
case 0x1229: /* Intel 8255[789] */
case 0x1031: /* Intel 82562EM */
case 0x2449: /* Intel 82562ET */
case 0x1039: /* Intel 82801BD PRO/100 VE */
break;
}
/*
* bar[0] is the memory-mapped register address (4KB),
* bar[1] is the I/O port register address (32 bytes) and
* bar[2] is for the flash ROM (1MB).
*/
ctlr = malloc(sizeof(Ctlr));
ctlr->port = p->mem[1].bar & ~0x01;
ctlr->pcidev = p;
if(ctlrhead != nil)
ctlrtail->next = ctlr;
else
ctlrhead = ctlr;
ctlrtail = ctlr;
pcisetbme(p);
}
}
static void
detach(Ether* ether)
{
Ctlr *ctlr;
ctlr = ether->ctlr;
csr32w(ctlr, Port, 0);
delay(1);
while(csr8r(ctlr, CommandR))
;
}
static int
scanphy(Ctlr* ctlr)
{
int i, oui, x;
for(i = 0; i < 32; i++){
if((oui = miir(ctlr, i, 2)) == -1 || oui == 0 || oui == 0xFFFF)
continue;
oui <<= 6;
x = miir(ctlr, i, 3);
oui |= x>>10;
//print("phy%d: oui %uX reg1 %uX\n", i, oui, miir(ctlr, i, 1));
if(oui == 0xAA00)
ctlr->eeprom[6] = 0x07<<8;
else if(oui == 0x80017){
if(x & 0x01)
ctlr->eeprom[6] = 0x0A<<8;
else
ctlr->eeprom[6] = 0x04<<8;
}
return i;
}
return -1;
}
int
i82557reset(Ether* ether)
{
int anar, anlpar, bmcr, bmsr, force, i, phyaddr, x;
unsigned short sum;
Block *bp;
uchar ea[Eaddrlen];
Ctlr *ctlr;
Cb *cb;
if(ctlrhead == nil)
i82557pci();
/*
* Any adapter matches if no ether->port is supplied,
* otherwise the ports must match.
*/
for(ctlr = ctlrhead; ctlr != nil; ctlr = ctlr->next){
if(ctlr->active)
continue;
if(ether->port == 0 || ether->port == ctlr->port){
ctlr->active = 1;
break;
}
}
if(ctlr == nil)
return -1;
/*
* Initialise the Ctlr structure.
* Perform a software reset after which need to ensure busmastering
* is still enabled. The EtherExpress PRO/100B appears to leave
* the PCI configuration alone (see the 'To do' list above) so punt
* for now.
* Load the RUB and CUB registers for linear addressing (0).
*/
ether->ctlr = ctlr;
ether->port = ctlr->port;
ether->irq = ctlr->pcidev->intl;
ether->tbdf = ctlr->pcidev->tbdf;
ctlr->ctlrno = ether->ctlrno;
ctlr->type = ether->type;
csr32w(ctlr, Port, 0);
delay(1);
while(csr8r(ctlr, CommandR))
;
csr32w(ctlr, Pointer, 0);
csr8w(ctlr, CommandR, LoadRUB);
while(csr8r(ctlr, CommandR))
;
csr8w(ctlr, CommandR, LoadCUB);
/*
* Initialise the action and receive frame areas.
*/
ctlrinit(ctlr);
/*
* Read the EEPROM.
* Do a dummy read first to get the size
* and allocate ctlr->eeprom.
*/
hy93c46r(ctlr, 0);
sum = 0;
for(i = 0; i < (1<<ctlr->eepromsz); i++){
x = hy93c46r(ctlr, i);
ctlr->eeprom[i] = x;
sum += x;
}
if(sum != 0xBABA)
print("#l%d: EEPROM checksum - 0x%4.4uX\n", ether->ctlrno, sum);
/*
* Eeprom[6] indicates whether there is a PHY and whether
* it's not 10Mb-only, in which case use the given PHY address
* to set any PHY specific options and determine the speed.
* Unfortunately, sometimes the EEPROM is blank except for
* the ether address and checksum; in this case look at the
* controller type and if it's am 82558 or 82559 it has an
* embedded PHY so scan for that.
* If no PHY, assume 82503 (serial) operation.
*/
if((ctlr->eeprom[6] & 0x1F00) && !(ctlr->eeprom[6] & 0x8000))
phyaddr = ctlr->eeprom[6] & 0x00FF;
else
switch(ctlr->pcidev->rid){
case 0x01: /* 82557 A-step */
case 0x02: /* 82557 B-step */
case 0x03: /* 82557 C-step */
default:
phyaddr = -1;
break;
case 0x04: /* 82558 A-step */
case 0x05: /* 82558 B-step */
case 0x06: /* 82559 A-step */
case 0x07: /* 82559 B-step */
case 0x08: /* 82559 C-step */
case 0x09: /* 82559ER A-step */
phyaddr = scanphy(ctlr);
break;
}
if(phyaddr >= 0){
/*
* Resolve the highest common ability of the two
* link partners. In descending order:
* 0x0100 100BASE-TX Full Duplex
* 0x0200 100BASE-T4
* 0x0080 100BASE-TX
* 0x0040 10BASE-T Full Duplex
* 0x0020 10BASE-T
*/
anar = miir(ctlr, phyaddr, 0x04);
anlpar = miir(ctlr, phyaddr, 0x05) & 0x03E0;
anar &= anlpar;
bmcr = 0;
if(anar & 0x380)
bmcr = 0x2000;
if(anar & 0x0140)
bmcr |= 0x0100;
switch((ctlr->eeprom[6]>>8) & 0x001F){
case 0x04: /* DP83840 */
case 0x0A: /* DP83840A */
/*
* The DP83840[A] requires some tweaking for
* reliable operation.
* The manual says bit 10 should be unconditionally
* set although it supposedly only affects full-duplex
* operation (an & 0x0140).
*/
x = miir(ctlr, phyaddr, 0x17) & ~0x0520;
x |= 0x0420;
for(i = 0; i < ether->nopt; i++){
if(cistrcmp(ether->opt[i], "congestioncontrol"))
continue;
x |= 0x0100;
break;
}
miiw(ctlr, phyaddr, 0x17, x);
/*
* If the link partner can't autonegotiate, determine
* the speed from elsewhere.
*/
if(anlpar == 0){
miir(ctlr, phyaddr, 0x01);
bmsr = miir(ctlr, phyaddr, 0x01);
x = miir(ctlr, phyaddr, 0x19);
if((bmsr & 0x0004) && !(x & 0x0040))
bmcr = 0x2000;
}
break;
case 0x07: /* Intel 82555 */
/*
* Auto-negotiation may fail if the other end is
* a DP83840A and the cable is short.
*/
bmsr = miir(ctlr, phyaddr, 0x01);
if((miir(ctlr, phyaddr, 0) & 0x1000) && !(bmsr & 0x0020)){
miiw(ctlr, phyaddr, 0x1A, 0x2010);
x = miir(ctlr, phyaddr, 0);
miiw(ctlr, phyaddr, 0, 0x0200|x);
for(i = 0; i < 3000; i++){
delay(1);
if(miir(ctlr, phyaddr, 0x01) & 0x0020)
break;
}
miiw(ctlr, phyaddr, 0x1A, 0x2000);
anar = miir(ctlr, phyaddr, 0x04);
anlpar = miir(ctlr, phyaddr, 0x05) & 0x03E0;
anar &= anlpar;
bmcr = 0;
if(anar & 0x380)
bmcr = 0x2000;
if(anar & 0x0140)
bmcr |= 0x0100;
}
break;
}
/*
* Force speed and duplex if no auto-negotiation.
*/
if(anlpar == 0){
force = 0;
for(i = 0; i < ether->nopt; i++){
if(cistrcmp(ether->opt[i], "fullduplex") == 0){
force = 1;
bmcr |= 0x0100;
ctlr->configdata[19] |= 0x40;
}
else if(cistrcmp(ether->opt[i], "speed") == 0){
force = 1;
x = strtol(ðer->opt[i][6], 0, 0);
if(x == 10)
bmcr &= ~0x2000;
else if(x == 100)
bmcr |= 0x2000;
else
force = 0;
}
}
if(force)
miiw(ctlr, phyaddr, 0x00, bmcr);
}
ctlr->configdata[8] = 1;
ctlr->configdata[15] &= ~0x80;
}
else{
ctlr->configdata[8] = 0;
ctlr->configdata[15] |= 0x80;
}
/*
* Load the chip configuration
*/
configure(ether, 0);
/*
* Check if the adapter's station address is to be overridden.
* If not, read it from the EEPROM and set in ether->ea prior to loading
* the station address with the Individual Address Setup command.
*/
memset(ea, 0, Eaddrlen);
if(memcmp(ea, ether->ea, Eaddrlen) == 0){
for(i = 0; i < Eaddrlen/2; i++){
x = ctlr->eeprom[i];
ether->ea[2*i] = x & 0xFF;
ether->ea[2*i+1] = (x>>8) & 0xFF;
}
}
bp = allocb(sizeof(Cb));
cb = (Cb*)bp->rp;
bp->wp += sizeof(Cb);
cb->command = CbIAS;
cb->link = NullPointer;
memmove(cb->data, ether->ea, Eaddrlen);
action(ctlr, bp);
/*
* Linkage to the generic ethernet driver.
*/
ether->attach = attach;
ether->transmit = transmit;
ether->interrupt = interrupt;
ether->detach = detach;
return 0;
}
|
